Tools with stimulus support

Below is an overview of all tools that support the stimulation of test variables using Start Stimulus test step and Stimulus test step.

Overview of the stimulus capabilities of the tools

By default, ecu.test converts the stimulus into a tool-compatible format and also automatically converts the trace files referenced in the DataFileSegment of an STI file into a tool-compatible format. All trace formats readable by ecu.test are supported. The following table lists the restrictions for tools/ports that, for various reasons, do not benefit from this automatic conversion.

In addition, input signal assignments and input signals for StopTriggers are supported for STI files by default, unless explicitly stated otherwise in the table.

Tool / Port

Notes and restrictions

A&D: iTest

Restrictions:

  • 由 STI 文件中的 DataFileSegment 引用的 Trace 文件不会由 ecu.test 自动转换。

  • 用户需要自行检查所使用的 Trace 格式是否受该工具支持。

ASAM: XIL

总线信号的激励通过 model access 执行,仅当该访问方式也支持激励时才可行。model access 的限制与说明同样适用于通用总线访问。

Restrictions:

  • 不支持激励输入信号。

  • 由 STI 文件中的 DataFileSegment 引用的 Trace 文件不会由 ecu.test 自动转换。

  • 用户需要自行检查所使用的 Trace 格式是否受该工具支持。

ASAM: XIL

总线信号的激励通过模型访问执行,且仅当该模型访问也支持激励时才可行。模型访问的限制/说明同样适用于基于模型的总线访问。

Restrictions:

  • 不支持激励输入信号。

  • 由 STI 文件中的 DataFileSegment 引用的 Trace 文件不会由 ecu.test 自动转换。

  • 用户需要自行检查所使用的 Trace 格式是否受该工具支持。

ASAM: XIL

Restrictions:

  • 由 STI 文件中的 DataFileSegment 引用的 Trace 文件不会由 ecu.test 自动转换。

  • 用户需要自行检查所使用的 Trace 格式是否受该工具支持。

dSPACE: ControlDesk

总线信号的激励通过 model access 执行,仅当该访问方式也支持激励时才可行。model access 的限制与说明同样适用于通用总线访问。

Restrictions:

  • 不支持激励输入信号。

  • 由 STI 文件中的 DataFileSegment 引用的 Trace 文件不会由 ecu.test 自动转换。

  • 用户需要自行检查所使用的 Trace 格式是否受该工具支持。

dSPACE: ControlDesk

总线信号的激励通过 model access 执行,仅当该访问方式也支持激励时才可行。model access 的限制与说明同样适用于通用总线访问。

Restrictions:

  • 不支持激励输入信号。

  • 由 STI 文件中的 DataFileSegment 引用的 Trace 文件不会由 ecu.test 自动转换。

  • 用户需要自行检查所使用的 Trace 格式是否受该工具支持。

dSPACE: ControlDesk

总线信号的激励通过模型访问执行,且仅当该模型访问也支持激励时才可行。模型访问的限制/说明同样适用于基于模型的总线访问。

Restrictions:

  • 不支持激励输入信号。

  • 由 STI 文件中的 DataFileSegment 引用的 Trace 文件不会由 ecu.test 自动转换。

  • 用户需要自行检查所使用的 Trace 格式是否受该工具支持。

dSPACE: ControlDesk

DataFileSegment:

  • An absolute path must be provided

  • Only MAT and MF4 can be referenced

SignalValueSegment:

  • A relative path must be provided

dSPACE: ControlDesk

ServiceEvent 信号的激励通过模型访问进行,并且仅当模型访问也支持激励时才可行。模型访问的限制/注释同样适用于通用的 ServiceManager 访问。

Restrictions:

  • 不支持激励输入信号。

  • 由 STI 文件中的 DataFileSegment 引用的 Trace 文件不会由 ecu.test 自动转换。

  • 用户需要自行检查所使用的 Trace 格式是否受该工具支持。

dSPACE: XIL API

总线信号的激励通过 model access 执行,仅当该访问方式也支持激励时才可行。model access 的限制与说明同样适用于通用总线访问。

Restrictions:

  • 不支持激励输入信号。

  • 由 STI 文件中的 DataFileSegment 引用的 Trace 文件不会由 ecu.test 自动转换。

  • 用户需要自行检查所使用的 Trace 格式是否受该工具支持。

dSPACE: XIL API

总线信号的激励通过 model access 执行,仅当该访问方式也支持激励时才可行。model access 的限制与说明同样适用于通用总线访问。

Restrictions:

  • 不支持激励输入信号。

  • 由 STI 文件中的 DataFileSegment 引用的 Trace 文件不会由 ecu.test 自动转换。

  • 用户需要自行检查所使用的 Trace 格式是否受该工具支持。

dSPACE: XIL API

总线信号的激励通过模型访问执行,且仅当该模型访问也支持激励时才可行。模型访问的限制/说明同样适用于基于模型的总线访问。

Restrictions:

  • 不支持激励输入信号。

  • 由 STI 文件中的 DataFileSegment 引用的 Trace 文件不会由 ecu.test 自动转换。

  • 用户需要自行检查所使用的 Trace 格式是否受该工具支持。

dSPACE: XIL API

Restrictions:

  • 由 STI 文件中的 DataFileSegment 引用的 Trace 文件不会由 ecu.test 自动转换。

  • 用户需要自行检查所使用的 Trace 格式是否受该工具支持。

dSPACE: XIL API

ServiceEvent 信号的激励通过模型访问进行,并且仅当模型访问也支持激励时才可行。模型访问的限制/注释同样适用于通用的 ServiceManager 访问。

Restrictions:

  • 不支持激励输入信号。

  • 由 STI 文件中的 DataFileSegment 引用的 Trace 文件不会由 ecu.test 自动转换。

  • 用户需要自行检查所使用的 Trace 格式是否受该工具支持。

ETAS: BOA

此端口支持 Stimulation control 中描述的所有功能。

ETAS: BOA

此端口支持 Stimulation control 中描述的所有功能。

ETAS: COSYM-SIL

Restrictions:

  • 由 STI 文件中的 DataFileSegment 引用的 Trace 文件不会由 ecu.test 自动转换。

  • 用户需要自行检查所使用的 Trace 格式是否受该工具支持。

Hirain: TestBaseVCI

此端口支持 Stimulation control 中描述的所有功能。

Hirain: TestBaseVCI

此端口支持 Stimulation control 中描述的所有功能。

HMS: Legacy Bus Interfaces (VCI V2)

此端口支持 Stimulation control 中描述的所有功能。

HMS: Legacy Bus Interfaces (VCI V2)

此端口支持 Stimulation control 中描述的所有功能。

HMS: VCI V4

此端口支持 Stimulation control 中描述的所有功能。

HMS: VCI V4

此端口支持 Stimulation control 中描述的所有功能。

Intrepid Control Systems: neoVI

此端口支持 Stimulation control 中描述的所有功能。

Intrepid Control Systems: neoVI

此端口支持 Stimulation control 中描述的所有功能。

IPG: CarMaker|RealTimeMaker

Only the following segments are supported:

  • Constant segment

  • Ramp segment (with start and end value)

Restrictions:

  • 不支持激励输入信号。

  • 由 STI 文件中的 DataFileSegment 引用的 Trace 文件不会由 ecu.test 自动转换。

  • 用户需要自行检查所使用的 Trace 格式是否受该工具支持。

MAGNA: BluePiraT

此端口支持 Stimulation control 中描述的所有功能。

MAGNA: BluePiraT

此端口支持 Stimulation control 中描述的所有功能。

MAGNA: BluePiraT

此端口支持 Stimulation control 中描述的所有功能。

Mathworks: MATLAB & Simulink

总线信号的激励通过 model access 执行,仅当该访问方式也支持激励时才可行。model access 的限制与说明同样适用于通用总线访问。

Restrictions:

  • 不支持激励输入信号。

  • 由 STI 文件中的 DataFileSegment 引用的 Trace 文件不会由 ecu.test 自动转换。

  • 用户需要自行检查所使用的 Trace 格式是否受该工具支持。

Mathworks: MATLAB & Simulink

仅支持对 Simulink 模型中的信号进行激励。参数无法激励。

Restrictions:

  • 不支持激励输入信号。

  • 由 STI 文件中的 DataFileSegment 引用的 Trace 文件不会由 ecu.test 自动转换。

MicroNova: NovaCarts

Restrictions:

  • 由 STI 文件中的 DataFileSegment 引用的 Trace 文件不会由 ecu.test 自动转换。

  • 用户需要自行检查所使用的 Trace 格式是否受该工具支持。

Modelica Association: FMI

激励总线信号的前提是启用包含待激励信号所在信号组的 循环写入。

Modelica Association: FMI

总线信号的激励通过 model access 执行,仅当该访问方式也支持激励时才可行。model access 的限制与说明同样适用于通用总线访问。

Restrictions:

  • 不支持激励输入信号。

  • 由 STI 文件中的 DataFileSegment 引用的 Trace 文件不会由 ecu.test 自动转换。

  • 用户需要自行检查所使用的 Trace 格式是否受该工具支持。

Modelica Association: FMI

Restrictions:

  • 不支持激励输入信号。

  • 由 STI 文件中的 DataFileSegment 引用的 Trace 文件不会由 ecu.test 自动转换。

MOTEON: MTB

Restrictions:

  • 由 STI 文件中的 DataFileSegment 引用的 Trace 文件不会由 ecu.test 自动转换。

  • 用户需要自行检查所使用的 Trace 格式是否受该工具支持。

NI: VeriStand

Restrictions:

  • 不支持激励输入信号。

  • 由 STI 文件中的 DataFileSegment 引用的 Trace 文件不会由 ecu.test 自动转换。

Opal-RT: RT-LAB

总线信号的激励通过 model access 执行,仅当该访问方式也支持激励时才可行。model access 的限制与说明同样适用于通用总线访问。

Restrictions:

  • 不支持激励输入信号。

  • 由 STI 文件中的 DataFileSegment 引用的 Trace 文件不会由 ecu.test 自动转换。

  • 用户需要自行检查所使用的 Trace 格式是否受该工具支持。

PEAK: PCAN-Basic, PCAN-FD

此端口支持 Stimulation control 中描述的所有功能。

PEAK: PCAN-Basic, PCAN-FD

此端口支持 Stimulation control 中描述的所有功能。

SAE: PassThru

此端口支持 Stimulation control 中描述的所有功能。

SAE: PassThru

此端口支持 Stimulation control 中描述的所有功能。

Speedgoat: SimulinkRealTimeXIL

总线信号的激励通过 model access 执行,仅当该访问方式也支持激励时才可行。model access 的限制与说明同样适用于通用总线访问。

Restrictions:

  • 不支持激励输入信号。

  • 由 STI 文件中的 DataFileSegment 引用的 Trace 文件不会由 ecu.test 自动转换。

  • 用户需要自行检查所使用的 Trace 格式是否受该工具支持。

Speedgoat: SimulinkRealTimeXIL

总线信号的激励通过模型访问执行,且仅当该模型访问也支持激励时才可行。模型访问的限制/说明同样适用于基于模型的总线访问。

Restrictions:

  • 不支持激励输入信号。

  • 由 STI 文件中的 DataFileSegment 引用的 Trace 文件不会由 ecu.test 自动转换。

  • 用户需要自行检查所使用的 Trace 格式是否受该工具支持。

Speedgoat: SimulinkRealTimeXIL

Restrictions:

  • 由 STI 文件中的 DataFileSegment 引用的 Trace 文件不会由 ecu.test 自动转换。

  • 用户需要自行检查所使用的 Trace 格式是否受该工具支持。

Synopsys: Silver

总线信号的激励通过 model access 执行,仅当该访问方式也支持激励时才可行。model access 的限制与说明同样适用于通用总线访问。

Restrictions:

  • 不支持激励输入信号。

  • 由 STI 文件中的 DataFileSegment 引用的 Trace 文件不会由 ecu.test 自动转换。

  • 用户需要自行检查所使用的 Trace 格式是否受该工具支持。

Synopsys: Silver

Restrictions:

  • 不支持激励输入信号。

  • 由 STI 文件中的 DataFileSegment 引用的 Trace 文件不会由 ecu.test 自动转换。

Synopsys: SilverXIL

总线信号的激励通过 model access 执行,仅当该访问方式也支持激励时才可行。model access 的限制与说明同样适用于通用总线访问。

Restrictions:

  • 不支持激励输入信号。

  • 由 STI 文件中的 DataFileSegment 引用的 Trace 文件不会由 ecu.test 自动转换。

  • 用户需要自行检查所使用的 Trace 格式是否受该工具支持。

Synopsys: SilverXIL

总线信号的激励通过模型访问执行,且仅当该模型访问也支持激励时才可行。模型访问的限制/说明同样适用于基于模型的总线访问。

Restrictions:

  • 不支持激励输入信号。

  • 由 STI 文件中的 DataFileSegment 引用的 Trace 文件不会由 ecu.test 自动转换。

  • 用户需要自行检查所使用的 Trace 格式是否受该工具支持。

Synopsys: SilverXIL

Restrictions:

  • 由 STI 文件中的 DataFileSegment 引用的 Trace 文件不会由 ecu.test 自动转换。

  • 用户需要自行检查所使用的 Trace 格式是否受该工具支持。

Synopsys: SilverXIL

Restrictions:

  • 由 STI 文件中的 DataFileSegment 引用的 Trace 文件不会由 ecu.test 自动转换。

  • 用户需要自行检查所使用的 Trace 格式是否受该工具支持。

Technica: BTS

此端口支持 Stimulation control 中描述的所有功能。

Technica: BTS

此端口支持 Stimulation control 中描述的所有功能。

Technica: BTS

此端口支持 Stimulation control 中描述的所有功能。

Technica: CM

此端口支持 Stimulation control 中描述的所有功能。

Technica: CM

此端口支持 Stimulation control 中描述的所有功能。

Technica: CM

此端口支持 Stimulation control 中描述的所有功能。

TOSUN: libTSCAN API

此端口支持 Stimulation control 中描述的所有功能。

TOSUN: libTSCAN API

此端口支持 Stimulation control 中描述的所有功能。

tracetronic: Ethernet

此端口支持 Stimulation control 中描述的所有功能。

tracetronic: Ethernet

此端口支持 Stimulation control 中描述的所有功能。

tracetronic: Ethernet

此端口支持 Stimulation control 中描述的所有功能。

tracetronic: SocketCAN

此端口支持 Stimulation control 中描述的所有功能。

tracetronic: SocketCAN

此端口支持 Stimulation control 中描述的所有功能。

Typhoon HIL: THCC

Restrictions:

  • 由 STI 文件中的 DataFileSegment 引用的 Trace 文件不会由 ecu.test 自动转换。

  • 用户需要自行检查所使用的 Trace 格式是否受该工具支持。

Vector: CANoe / CANalyzer

总线信号的激励通过 model access 执行,仅当该访问方式也支持激励时才可行。model access 的限制与说明同样适用于通用总线访问。

Restrictions:

  • 不支持激励输入信号。

  • 由 STI 文件中的 DataFileSegment 引用的 Trace 文件不会由 ecu.test 自动转换。

  • 用户需要自行检查所使用的 Trace 格式是否受该工具支持。

Vector: CANoe / CANalyzer

总线信号的激励通过模型访问执行,且仅当该模型访问也支持激励时才可行。模型访问的限制/说明同样适用于基于模型的总线访问。

Restrictions:

  • 不支持激励输入信号。

  • 由 STI 文件中的 DataFileSegment 引用的 Trace 文件不会由 ecu.test 自动转换。

  • 用户需要自行检查所使用的 Trace 格式是否受该工具支持。

Vector: CANoe / CANalyzer

Restrictions:

  • 由 STI 文件中的 DataFileSegment 引用的 Trace 文件不会由 ecu.test 自动转换。

  • 用户需要自行检查所使用的 Trace 格式是否受该工具支持。

Vector: SIL Kit

此端口支持 Stimulation control 中描述的所有功能。

Vector: SIL Kit

此端口支持 Stimulation control 中描述的所有功能。

Vector: SIL Kit

此端口支持 Stimulation control 中描述的所有功能。

Vector: XL API

此端口支持 Stimulation control 中描述的所有功能。

Vector: XL API

此端口支持 Stimulation control 中描述的所有功能。

Vector: XL API

此端口支持 Stimulation control 中描述的所有功能。

Vehinfo: LABCAR

总线信号的激励通过 model access 执行,仅当该访问方式也支持激励时才可行。model access 的限制与说明同样适用于通用总线访问。

Restrictions:

  • 不支持激励输入信号。

  • 由 STI 文件中的 DataFileSegment 引用的 Trace 文件不会由 ecu.test 自动转换。

  • 用户需要自行检查所使用的 Trace 格式是否受该工具支持。

Vehinfo: LABCAR

The following LabCar-side restrictions apply:

  • Up to version 3.7.9, only STI 1.0 can be used for stimulation.

  • As of version 3.7.10, STI 2.0 is also supported.

  • The SignalValueSegment is not supported.

  • Only DAT and MAT files compatible with LabCar can be used as file reference.

  • Only ‘forward’ and ‘linear’ interpolation methods are supported.

It is mandatory to specify a stimulation task in the test bench configuration. Thereby the use of wildcards (* and ?) is not possible!

The value for “duration” must not be +INF, but must be set to a concrete numeric value.

Restrictions:

  • 不支持激励输入信号。

  • 由 STI 文件中的 DataFileSegment 引用的 Trace 文件不会由 ecu.test 自动转换。

  • 用户需要自行检查所使用的 Trace 格式是否受该工具支持。

Vehinfo: LABCAR

The following LabCar-side restrictions apply:

  • Up to version 3.7.9, only STI 1.0 can be used for stimulation.

  • As of version 3.7.10, STI 2.0 is also supported.

  • The SignalValueSegment is not supported.

  • Only DAT and MAT files compatible with LabCar can be used as file reference.

  • Only ‘forward’ and ‘linear’ interpolation methods are supported.

It is mandatory to specify a stimulation task in the test bench configuration. Thereby the use of wildcards (* and ?) is not possible!

The value for “duration” must not be +INF, but must be set to a concrete numeric value.

Restrictions:

  • 不支持激励输入信号。

  • 由 STI 文件中的 DataFileSegment 引用的 Trace 文件不会由 ecu.test 自动转换。

  • 用户需要自行检查所使用的 Trace 格式是否受该工具支持。

X2E: Xoraya

此端口支持 Stimulation control 中描述的所有功能。

X2E: Xoraya

此端口支持 Stimulation control 中描述的所有功能。

X2E: Xoraya

此端口支持 Stimulation control 中描述的所有功能。

X2E: Xoraya

此端口支持 Stimulation control 中描述的所有功能。

ZLG: zlgcan

此端口支持 Stimulation control 中描述的所有功能。

ZLG: zlgcan

此端口支持 Stimulation control 中描述的所有功能。