Port SERVICEACCESS - SERVICE_MANAGER¶
Service access via model
Stimulation¶
ServiceEvent 信号的激励通过模型访问进行,并且仅当模型访问也支持激励时才可行。模型访问的限制/注释同样适用于通用的 ServiceManager 访问。
Restrictions:
不支持激励输入信号。
由 STI 文件中的 DataFileSegment 引用的 Trace 文件不会由 ecu.test 自动转换。
用户需要自行检查所使用的 Trace 格式是否受该工具支持。
Properties 🛈¶
Name |
在以下情况下可用 |
默认值 |
有效值 |
Type |
Description |
|---|---|---|---|---|---|
Path to the configuration file |
string |
This file on the tool host defines templates to find the matching model paths based on service data. Can be absolute or relative to the tool host base path. |
|||
Model port |
string |
Port ID (e.g. “MDL01”) of the model port via which the model access is to be performed. This property can remain empty if there is exactly one model port. If there is more than one model port, this property must be set. |
|||
Cycle time ❲ms❳ |
100 |
int |
Simulation step size of the model. Will be used as waiting time between sequential model access steps if new values need to be calculated within the model. For example, when reading an array the corresponding index is first registered in the model. The correct matching value is only available when it has been calculated by the model after a specified time. |