SAE: PassThru

供应商信息

Vendor

Web page

产品名称

Version

SAE International

https://www.sae.org

SAE J2534 PassThru API

04.04

Categories

MDL 🛈

APL 🛈

BAN 🛈

BMA 🛈

SVC 🛈

DGN 🛈

FIU 🛈

EES 🛈

FCT 🛈

DBG 🛈

IMG 🛈

AUDIO 🛈

ENVSIM 🛈

ENVCOM 🛈

✓

✓

✓

✓

✓

Signal recordings(信号记录) 🛈

文件格式

Comment

*.asc

*.mf4

BUSACCESS - CAN(-FD) 端口仅支持 MDF4 总线日志。XCP 端口支持基于信号的 MDF4 记录。

*.pcapng

BUSACCESS - CAN(-FD) 端口将使用 linktype=227。生成的文件无法由 Trace Analysis 处理。

Platform

操作系统

Support

Windows

✓

Linux

Ports

Info

带有 ✦ 标记的端口属于 Add-on ecu.test calibration(需要单独的许可证)

Specifics

This interface allows, by means of hardware, direct CAN bus access for all devices for which an SAE J2534 pass-thru driver (64 Bit) is installed. It supports the test steps read signal, read/write signal group as well as monitor and supports signal recording, Raw diagnostics with KWP2000 over ISO-TP, the Mini residual bus simulation and Additional functions of the close-to-hardware bus connections. For CAN-FD both the official SAE J2534-2-2019 and the proprietary GMW17753 standard are supported.

Tested hardware:

  • Intrepid ValueCAN4-2

  • PEAK PCAN PassThru

  • Kvaser (only with a virtual device)

  • Vector VN8970

Note

The exact range of functionality depends very much on the type and vendor of the hardware used. Some vendors might not implement certain options (e.g. ISO-TP extended addressing) or restrict the possible number or combination of controller instances (e.g. only CAN or diagnostics with native ISO-TP but not both).

If there are problems configuring or using the tool, please check the manufacturer information and leave unsupported parameters in ecu.test at their default values.

Name

在以下情况下可用

默认值

有效值

Type

Description

Hardware

[‘<online query>’, ‘<no toollib start>’]

string

选择应使用的硬件

Device name

string

Device to use

Timeout for tool call ❲in sec.❳

‘600’

string

工具调用被中止前的超时时间。