Technica: BTS¶
供应商信息
Vendor |
Web page |
产品名称 |
Version |
|---|---|---|---|
Technica Engineering GmbH |
BTS |
Categories
MDL 🛈 |
APL 🛈 |
BAN 🛈 |
BMA 🛈 |
SVC 🛈 |
DGN 🛈 |
FIU 🛈 |
EES 🛈 |
FCT 🛈 |
DBG 🛈 |
IMG 🛈 |
AUDIO 🛈 |
ENVSIM 🛈 |
ENVCOM 🛈 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
✓ |
✓ |
✓ |
✓ |
Signal recordings(信号记录) 🛈
文件格式 |
Comment |
|---|---|
*.asc |
|
*.mf4 |
BUSACCESS - CAN(-FD) 端口仅支持 MDF4 总线日志。XCP 端口支持基于信号的 MDF4 记录。 |
*.pcapng |
BUSACCESS - CAN(-FD) 端口将使用 linktype=227。生成的文件无法由 Trace Analysis 处理。 |
Platform
操作系统 |
Support |
|---|---|
Windows |
✓ |
Linux |
Ports¶
Info
带有 ✦ 标记的端口属于 Add-on ecu.test calibration(需要单独的许可证)
Specifics¶
This interface allows, by means of hardware, direct CAN and CAN-FD as well as FlexRay bus access. It supports the test steps read signal and read/write signal group (all bus systems) as well as monitor (CAN only), and supports signal recording (all bus systems), Raw diagnostics with KWP2000 over ISO-TP (CAN only), the Mini residual bus simulation (CAN only), and Additional functions of the close-to-hardware bus connections (all bus systems).
Supported hardware and drivers
Technica BTS
To use the driver in ecu.test, you have to install the TE-Driver and ensure the installation directory is listed in the PATH variable.
place the files TE-DriverBase.dll and libtedrv.dll (Release or RelWithDebInfo variants; Debug is not supported) along with further DLL files these might depend on into one of the directories listed in the PATH variable, or add the directory where they are to said environment variable.
Peculiarities and Restrictions
The “CAN FD tolerant” mode of operation, where classical CAN 2.0 frames are transmitted and received on a bus where other participants exchange proper CAN FD frames, is not supported.
Properties 🛈¶
Name |
在以下情况下可用 |
默认值 |
有效值 |
Type |
Description |
|---|---|---|---|---|---|
Network interface card |
[‘<online query>’, ‘<no toollib start>’] |
string |
Please select the network adapter to access the BTS boards |
||
Timeout for tool call ❲in sec.❳ |
‘600’ |
string |
工具调用被中止前的超时时间。 |