PEAK: PCAN-Basic, PCAN-FD¶
供应商信息
Vendor |
Web page |
产品名称 |
Version |
|---|---|---|---|
PEAK-System Technik GmbH |
PCAN-Basic, PCAN-FD |
PCAN-Basic: from 4.6.0, tested up to 4.10.1; PLIN-API: from 2.8.1, tested up to 3.1.0 |
Categories
MDL 🛈 |
APL 🛈 |
BAN 🛈 |
BMA 🛈 |
SVC 🛈 |
DGN 🛈 |
FIU 🛈 |
EES 🛈 |
FCT 🛈 |
DBG 🛈 |
IMG 🛈 |
AUDIO 🛈 |
ENVSIM 🛈 |
ENVCOM 🛈 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
✓ |
✓ |
✓ |
✓ |
✓ |
Signal recordings(信号记录) 🛈
文件格式 |
Comment |
|---|---|
*.asc |
|
*.mf4 |
BUSACCESS - CAN(-FD) 端口仅支持 MDF4 总线日志。XCP 端口支持基于信号的 MDF4 记录。 |
*.pcapng |
BUSACCESS - CAN(-FD) 端口将使用 linktype=227。生成的文件无法由 Trace Analysis 处理。 |
Platform
操作系统 |
Support |
|---|---|
Windows |
✓ |
Linux |
Ports¶
Info
带有 ✦ 标记的端口属于 Add-on ecu.test calibration(需要单独的许可证)
- Port APPLICATION - XCP-CAN
✦ - Port APPLICATION - XCP-CAN-FD
✦ - Port APPLICATION - XCP-CAN-FD-TOLERANT
✦ - Port BUSACCESS - CAN
- Port BUSACCESS - CAN-FD
- Port BUSACCESS - LIN
- Port DIAGNOSTICS - CAN
- Port DIAGNOSTICS - CAN-FD
- Port DIAGNOSTICS - CAN-FD_TOLERANT
- Port DIAGNOSTICS - J1939
- Port ELECTRICERRORSIM - CANWAY
Specifics¶
This interface allows, by means of hardware, direct CAN and LIN bus access. It supports the test steps read signal, read/write signal group as well as monitor and supports signal recording, Raw diagnostics with KWP2000 over ISO-TP, the Mini residual bus simulation and Additional functions of the close-to-hardware bus connections.
Supported drivers
PEAK PCAN-Basic
PEAK PLIN-API
In order to use the driver in ecu.test, the files PCANBasic.dll and PLinApi.dll
must be present in the directory %windir%/System32/.
Tested hardware:
Peak PCAN-USB
Peak PCAN-USB Pro
Peak PCAN-PC Card
Limitations
PCAN-PC Card ports can (as opposed to the ports of the USB devices) not be used simultaneously by ecu.test and PCAN-View
Using CAN and LIN on the same device at once requires setting the same ID for both controllers with the respective PEAK software.
Properties 🛈¶
Name |
在以下情况下可用 |
默认值 |
有效值 |
Type |
Description |
|---|---|---|---|---|---|
Hardware |
[‘<online query>’, ‘<no toollib start>’] |
string |
选择应使用的硬件 |
||
Debug |
☐ |
bool |
|||
Timeout for tool call ❲in sec.❳ |
‘600’ |
string |
工具调用被中止前的超时时间。 |