HMS: Legacy Bus Interfaces (VCI V2)¶
供应商信息
Vendor |
Web page |
产品名称 |
Version |
|---|---|---|---|
HMS Technology Center Ravensburg GmbH |
ACT, FRC-EP 150, USB-to-CAN II Automotive |
FlexRay VCI 2.5, VCI 2.1.8 |
Categories
MDL 🛈 |
APL 🛈 |
BAN 🛈 |
BMA 🛈 |
SVC 🛈 |
DGN 🛈 |
FIU 🛈 |
EES 🛈 |
FCT 🛈 |
DBG 🛈 |
IMG 🛈 |
AUDIO 🛈 |
ENVSIM 🛈 |
ENVCOM 🛈 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
✓ |
✓ |
✓ |
✓ |
✓ |
Signal recordings(信号记录) 🛈
文件格式 |
Comment |
|---|---|
*.asc |
|
*.mf4 |
BUSACCESS - CAN(-FD) 端口仅支持 MDF4 总线日志。XCP 端口支持基于信号的 MDF4 记录。 |
*.pcapng |
BUSACCESS - CAN(-FD) 端口将使用 linktype=227。生成的文件无法由 Trace Analysis 处理。 |
Platform
操作系统 |
Support |
|---|---|
Windows |
✓ |
Linux |
Ports¶
Info
带有 ✦ 标记的端口属于 Add-on ecu.test calibration(需要单独的许可证)
Specifics¶
This interface allows, by means of hardware, direct CAN and FlexRay bus access. It supports the test steps read signal, read/write signal group (all bus systems) as well as monitor (CAN only) and supports signal recording (all bus systems), Raw diagnostics with KWP2000 over ISO-TP (CAN only), the Mini residual bus simulation (CAN only) and Additional functions of the close-to-hardware bus connections (all bus systems).
If an ETAS ES520 module (equivalent to IXXAT FlexRay CCM) is used and the connection goes via an ES600 module, the time stamps of the received messages can jump arbitrarily.
Properties 🛈¶
Name |
在以下情况下可用 |
默认值 |
有效值 |
Type |
Description |
|---|---|---|---|---|---|
Hardware |
[‘<online query>’, ‘<no toollib start>’] |
string |
选择应使用的硬件 |
||
IP address |
uri |
If the option ‘AutoAccept’ in the IP-dialogue of ETAS is activated and only one IXXAT box is available in the network, than no setting is necessary. Else the IP address of an IXXAT box is recommended for initialising the test environment without user interaction. |
|||
Timeout for tool call ❲in sec.❳ |
‘600’ |
string |
工具调用被中止前的超时时间。 |