ASAM: iLinkRT

供应商信息

Vendor

Web page

产品名称

Version

ASAM e.V.

https://www.asam.net

High-Speed Automation-Access-Protocol for MC-Server

3.0.0

Categories

MDL 🛈

APL 🛈

BAN 🛈

BMA 🛈

SVC 🛈

DGN 🛈

FIU 🛈

EES 🛈

FCT 🛈

DBG 🛈

IMG 🛈

AUDIO 🛈

ENVSIM 🛈

ENVCOM 🛈

✓

Platform

操作系统

Support

Windows

✓

Linux

✓

Info

This tool can be configured and used multiple times in parallel.

Ports

Specifics

The ASAM iLinkRT standard defines a protocol for high-speed measurement and calibration data exchange in test automation systems. From protocol version 3 the standard supports multi-server multi-client environments. So multiple clients can connect to multiple servers to receive data via Ethernet (UDP/P) multicast messages to achieve higher throughput and minimum delay.

Software requirements

  • iLinkRT server with protocol version 3.0.0

Features

  • Start and stop measurements manually via tool job or automatically at package start

  • Access scalar measurements

  • Start and stop recording

  • Trace analysis of captured signals if recording format is MDF3 or MDF4 (recommended)

Limitations

  • No server discovery

  • Data acquisition only via multicast supported

  • No page handling

  • A2L information is not requested from iLinkRT server and has to be configured in ecu.test

  • No calibration

  • No access to complex data types (vector, matrix, curve, map)

  • Measurements are captured in default time raster

  • Support for one device respectively port at the same time

Notes

  • The desired capture format can’t be configured in ecu.test tool adapter and has to be set in the tool respectively in the iLinkRT server

  • Multiclient recording: all clients have to send the STOP command to finish the recording

Info

If the communication between iLinkRT server and ecu.test is working but no measurement is received, please check the firewall settings. The UDP destination port for DAQ frames, that is configured in iLinkRT server should be allowed for inbound connections. If there are multiple network nodes like Ethernet routers and switches between Tool Server and iLinkRT server, check their support for multicast forwarding. If Tool Server and iLinkRT server are running on the same machine it is recommended to not operate the iLinkRT server on the loopback device (“127.0.0.1”) but to use a real network interface instead and configure its true IP address in the test bench configuration.

Name

在以下情况下可用

默认值

有效值

Type

Description

iLinkRT server

uri

IP or host name of the iLinkRT server.

iLinkRT server port

int

Port of the iLinkRT server over which commands are sent via Unicast.

iLinkRT client

‘<any>’

[ONLINE]

string

IP address of the iLinkRT client’s network adapter. Using the setting <any> will listen on all network interfaces (corresponds to “0.0.0.0”). The setting <auto> defaults to the computer’s host name with the IP address which it is resolved to. The chosen network adapter is used to receive multicast messages from the server for data acquisition and events. Therefore please make sure this address is reachable by the server, especially if you are using a VPN or proxy.

Start of measurement

Automatically

[Automatically, Manually]

string

Automatically: Automatic start of measurement at test start. At the end of the test the measurement is stopped again.

Manually: Start and stop of measurement have to be controlled using tool jobs or directly in the tool.

Timeout for tool call ❲in sec.❳

‘600’

string

工具调用被中止前的超时时间。

StartMeasurement

Start measurement

Parameterization

返回值

Name

在以下情况下可用

默认值

有效值

Type

Description

return

☐

bool

True if measurement is running. False otherwise.

StopMeasurement

Stop measurement

Parameterization

返回值

Name

在以下情况下可用

默认值

有效值

Type

Description

return

☐

bool

True if measurement is stopped. False otherwise.