Port MODELACCESS - SMF_Bosch

Model port with Bosch specific SMF representation (based on DGS determinations).

Stimulation

The following LabCar-side restrictions apply:

  • Up to version 3.7.9, only STI 1.0 can be used for stimulation.

  • As of version 3.7.10, STI 2.0 is also supported.

  • The SignalValueSegment is not supported.

  • Only DAT and MAT files compatible with LabCar can be used as file reference.

  • Only ‘forward’ and ‘linear’ interpolation methods are supported.

It is mandatory to specify a stimulation task in the test bench configuration. Thereby the use of wildcards (* and ?) is not possible!

The value for “duration” must not be +INF, but must be set to a concrete numeric value.

Restrictions:

  • 不支持激励输入信号。

  • 由 STI 文件中的 DataFileSegment 引用的 Trace 文件不会由 ecu.test 自动转换。

  • 用户需要自行检查所使用的 Trace 格式是否受该工具支持。

Supported execution modes

另请参见:时间模式的特殊说明

Preferred time source/mode: Real-time

Real-time:

To use real-time mode, the Test configuration in the Execution tab must be configured as the source ‘real time’.

Info

The following modes are not supported: Stepwise simulation time, Continuous simulation time

Name

在以下情况下可用

默认值

有效值

Type

Description

Model file

string

Model file (.eew)

Default acquisition rate

‘Tool-Default’

string

Declaration of the measurement acquisition rate for signal recordings used as alternative in case no acquisition rate is set in the test step (’*’ and ‘?’ can be used as wildcard). “Tool-Default” activates the use of the standard acquisition rate of the tool. For reading signals, “Asynchronous RTPC Access” is always chosen.

SMF files

string

List of paths of the SMF files which should be used (empty if no SMF files available).

Paths can be absolute, relative to the model directory or relative to the tool host base path.

Parameter file paths

string

List of absolute paths of parameter files *.dcm and *.mpa to use (leave empty to use none).

Paths can be absolute, relative to the model directory or relative to the tool host base path.

Bypass reading buffer

☑

bool

If this option is set to True, all variables will be read directly from the real-time platform. However, if set to False, accessible values will be read over the LCO buffer. This speeds up the reading process (lower workload) but leads to less accurate values because the buffer is only updated every few (ca. 100) milliseconds.

Stimulation task

string

Stimulation task, that is used for playback of signal generators.

Switch signals before stimulation

☑

bool

Determines whether signals are switched to use the signal generator before or after starting the signal generator. True means before, False means after.

Device used by signal generators

‘RTPC’

string

Name of the device used for uploading signal generators.

Display SMF Inport signal elements

☑

bool

Shows the SMF variables that are abstracted by the SMF inport. If necessary use this setting for old packages that use this option and set it TRUE.

GetFilenamesOfLastRecording

Returns the file paths of the last recording.

Parameterization

返回值

Name

在以下情况下可用

默认值

有效值

Type

Description

fileNames

object

File path list of the recording files. Can be empty.

LoadParameterFile

Loads values from a parameter file into the experiment

Parameterization

Parameter

Name

在以下情况下可用

默认值

有效值

Type

Description

FilePath

string

Path to the *.dcm or *.mpa file on the tool host

ReadValue

Reads a value of a variable

Parameterization

Parameter

Name

在以下情况下可用

默认值

有效值

Type

Description

Task

string

Task used for registering the value

VariablePath

string

Variable path

返回值

Name

在以下情况下可用

默认值

有效值

Type

Description

result

string

Numeric return value or NotPresent

RestartSimulation

Stops and restarts the simulation resetting every previously written values.

Parameterization

Parameter

Name

在以下情况下可用

默认值

有效值

Type

Description

Reset

True

[False, True]

bool

Re-deploys the model on the real-time platform.

StartSimulation

Starting the simulation of the real-time platform.

StopSimulation

Stopping the simulation of the real-time platform.

WriteValue

Writes the value of a variable

Parameterization

Parameter

Name

在以下情况下可用

默认值

有效值

Type

Description

Task

string

Task used for registering the value

Value

0

float

Numeric return value

VariablePath

string

Variable path