Port BUSACCESS - GENERIC_SOCKETADAPTOR

Generic bus access for SocketAdaptor ports

Stimulation

此端口不具备激励能力。

Name

在以下情况下可用

默认值

有效值

Type

Description

总线标识符

string

Logical name of the bus system

Model port

string

Port ID (e.g. “MDL01”) of the model port via which the model access is to be performed. This property can remain empty if there is exactly one model port. If there is more than one model port, this property must be set.

Bus-DB

string

Bus-database (This bus-database is usually taken from the test configuration. Please note that the bus-database is not automatically transferred to the tool, but must be stored there manually.)

Bus path

‘slave_?Appl/BusSystems/Ethernet/Ethernet_K?’

string

Base path of the model variables for the bus signals and messages. The Rx and Tx path specifications refer to this base path. The bus path may contain the single character wildcard “?”.

Rx path

‘%(receiver)s/RX/IPDUs/%(pdu)s/Signals/%(signal)s/Value’

string

Pattern of model path for signal reading

Tx path

‘%(node)s/TX/IPDUs/%(pdu)s/Signals/%(signal)s/Overwrite Value’

string

Pattern of model path for signal manipulation

Tx-Switch path

‘%(node)s/TX/IPDUs/%(pdu)s/Signals/%(signal)s/Switch Value’

string

Pattern of model path to the switch for signal manipulation