Port MODELACCESS - DEFAULT

Model access

Stimulation

此端口不具备激励能力。

Supported execution modes

另请参见:时间模式的特殊说明

Preferred time source/mode: Real-time

Real-time:

To use real-time mode, the Test configuration in the Execution tab must be configured as the source ‘real time’.

Info

The following modes are not supported: Stepwise simulation time, Continuous simulation time

Name

在以下情况下可用

默认值

有效值

Type

Description

Alive signal

☐

bool

Activates an alive signal on port startup which toggles from 0 to 1 and back.

Interval

Alive signal

1

int

The transmission interval in seconds.

Alive signal variable path

Alive signal

string

The variable path the alive signal is written to.

Variable path for the connection state

Alive signal

string

This variable is 1 while the port is used for test execution. Meanwhile the alive signal is sent.

Activate alarm check

☐

bool

Avoids writing variables if the test bench is in alarm state.

Alarm state variable path

Activate alarm check

string

Variable path of the alarm state of the test bench. An active Alarm corresponds to a value greater than 0.