通过总线硬件接入的 CANway FIU

CANway FIU 使用说明:

引脚分配通过如下结构的 XML mapping file(XML 映射文件) 完成。

<?xml version="1.0" encoding="UTF-8"?>
<xs:schema xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:tns="http://www.example.org/NewXMLSchema" elementFormDefault="qualified" version="1.0">
    <xs:element name="CANWAYFIUCONFIG">
        <xs:complexType>
            <xs:sequence>
                <xs:element name="MODULE" type="FiuModuleType" minOccurs="1" maxOccurs="unbounded"/>
            </xs:sequence>
            <xs:attribute name="version" type="xs:string" use="optional"/>
        </xs:complexType>
    </xs:element>

    <xs:complexType name="FiuModuleType">
        <xs:sequence>
            <xs:element name="CANID" type="CanIdType" minOccurs="1" maxOccurs="1"/>
            <xs:element name="PINS" type="PinListType" minOccurs="1" maxOccurs="1"/>
        </xs:sequence>
        <xs:attribute name="name" type="xs:string" use="required"/>
    </xs:complexType>

    <xs:simpleType name="CanIdType">
        <xs:restriction base="xs:string">
            <xs:pattern value="0x[0-9A-Fa-f]+"/>
        </xs:restriction>
    </xs:simpleType>

    <xs:complexType name="PinListType">
        <xs:sequence>
            <xs:element name="PIN" type="PinType" minOccurs="1" maxOccurs="20"/>
        </xs:sequence>
    </xs:complexType>

    <xs:complexType name="PinType">
        <xs:simpleContent>
            <xs:extension base="PinNameType">
                <xs:attribute name="id" type="PinIdType" use="required"/>
            </xs:extension>
        </xs:simpleContent>
    </xs:complexType>

    <xs:simpleType name="PinNameType">
        <xs:restriction base="xs:string">
            <xs:pattern value=".+"/>
        </xs:restriction>
    </xs:simpleType>

    <xs:simpleType name="PinIdType">
        <xs:restriction base="xs:integer">
            <xs:minInclusive value="1"/>
            <xs:maxInclusive value="20"/>
        </xs:restriction>
    </xs:simpleType>
</xs:schema>

例如,配置文件可以写成如下形式:

<?xml version="1.0" encoding="UTF-8"?>
<CANWAYFIUCONFIG xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="CanwayFIU.xsd">
  <MODULE name="Module1">
    <CANID>0x123</CANID>
    <PINS>
      <PIN id="1">Pin One</PIN>
      <PIN id="2">Pin Two</PIN>
      <PIN id="3">Pin Three</PIN>
    </PINS>
  </MODULE>
</CANWAYFIUCONFIG>

使用注意事项:

这些故障可以通过拖放添加到 test case 中。支持单点故障,例如中断、对地短路、对电池电压短路以及 pin-to-pin 故障。此外,还可以在 EES ErrorSet(EES 错误集) 中同时施加不同故障。CANway FIU 不支持多引脚故障。无负载的 pin-to-pin 故障按 “先中断,再短路” 的顺序施加。不支持通过广播报文重新配置。